Rentang Besar Lengkungan Mesin Roll Forming

No

  Large Span Forming Machine

1

Suitable Material

Colored Steel plate, Galvanized Board,Aluminum plate

2

Width of the raw material

914mm

3

Rows of rollers

13 rows

4

Roller Material

45# steel, high-frequency quenchingHRC 58-62

5

Appearance size

9000 × 2250× 2300mm

6

Total power

Main motor power -7.5kw

Hydraulic station power-4kw

7

Arch Machine Power

4+1.5+1.5KW

8

Thickness of raw material

0.6-1.2mm

9

Productivity

Straight panel:15m/min,Arched panel: 13m/min

Occlusion speed: 6m/min

10

Suitable Span

38m

11

Voltage

380V  50Hz 3phases

12

PLC

Germany Siemens

 Large Span Forming Machine Introduction of Components

Manual Uncoiler

Usage:It is used to support the steel coil and uncoil it in a turnable way. The steel coil is uncoiled by hand. Loading capacity :2T. Inner diameter : 450-510mm

Entry Beach

Put the raw material(steel plate) through the beach to manufacture and process, it can guarantee that the products are neat, parallel and everything is uniformity.

Main Roll Forming Machine

In order to keep the product shape and precision, adopts welded sheet structure, motor reducer drive, chain transmission, roller surfaces polishing, hard plating , heat treatment and galvanizational treatment . The polished surface and the heat treatment towards the molds also can keep the molding plate surface smooth and not easy to be marked when it is being stamped.

Shearing Mechanism

It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products. Material of blades : Cr12

Components:It contains one set of cutting tools, one hydraulic tank

and one cutter machine.

Components:It contains one set of cutting tools, one hydraulic tank and one cutter machine.

Hydraulic Station

It is controlled by gear wheel oil pump. After filling the hydraulic oil into the hydraulic oil tank ,the pump drive the cutter machine to begin the cutting job. Hydraulic oil: 40#.Components: The system includes a set of hydraulic tank , a set of hydraulic oil pump, two hydraulic pipes.

Computer Control Cabinet

It adopts Delta PLC to control. The target piece`s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use.

Encoder

One counter gauges length, pulses, and decides length.

Run Out Tables

It adopts welded steel and supported roller to transmit the products.

Seamer

It`s used to seam the panels.